The eaves are the edges of the roof which overhang the face of a wall and, normally, project beyond the side of a building. The word descends from Old English efes, meaning edge, and it is usually used in the plural because a building has them in pairs. Eaves do quiet structural work — they keep rain off walls, shield pathways, and prevent erosion of the footings — while giving the roof ridge its counterweight at the wall line, and in styles from Chinese palace architecture to the American Craftsman bungalow they became the most decorated member of the whole roof.
Type
Roof edge overhanging the wall face
Era / Origin
Old English efes ("edge"); universal in pitched-roof building
Primary Material
Timber rafters closed with fascia and soffit boards
Structural Function
Sheds water clear of walls and footings; shades openings
Overview
Eaves are the roof's drainage detail. By throwing water clear of the wall face, they stop water ingress where roof meets wall and reduce rain splatter on the wall surface below; the ground line beneath the outer edge, the eavesdrip or dripline, is where planning rules typically step in, requiring that the overhang not oversail the property boundary. The overhang also shelters openings used to ventilate the roof space, and at the gable the eaves may project on purlins or lookouts capped by bargeboards, a detail distinguished as the gable overhang.
Beyond water, eaves manage sun and wind. As part of passive solar design the overhang can be sized to adjust solar gain to suit the local climate, the latitude, and the orientation of the building, while engineers must design eaves for local wind speeds, since the overhang can significantly increase the wind loading on the roof.
Core Characteristics
Fascia: A board running the length of the eaves that protects the exposed ends of the rafters and provides the fixing point for gutters.
Soffit: The board filling the underside of the eaves at right angles to the wall — decorative, but also sealing the gap between the rafters from vermin and weather.
Wide bracketed eaves: American Craftsman and Italianate houses favour very wide eaves with decorative brackets technically called modillions, an Arts and Crafts-influenced flourish often applied with no functional need.
Decorated eaves: Eaves may be highly decorated as part of an architectural style; Chinese buildings elaborate the overhang with interlocking dougong bracket sets beneath deep tiled timber eaves.
Notable Examples
Chinese imperial roofs: The deep overhanging eaves of buildings such as the Forbidden City in Beijing, carried on dougong bracketing, show eaves treated as the principal decorative zone of the roof.
Craftsman and Italianate houses: The wide, bracketed eaves of the Craftsman bungalow and the Italianate villa, whose modillion brackets are display rather than structure.
Vernacular cottages: In vernacular building from Welsh cottages to English cottages, modest eaves overhangs kept rain off lime-washed and rendered walls, protecting the most vulnerable fabric.
Residential: Houses where eaves do their daily work.
Influence and Legacy
A passive-design instrument: The eaves overhang remains a standard tool of passive solar design, tuned to latitude and orientation so that high summer sun is blocked while low winter sun is admitted.
A measure of style: From the modillion-bracketed eaves of Craftsman and Italianate houses to the dougong-supported eaves of Chinese official building, the treatment of the eaves line is one of the quickest indicators of a building's traditional allegiance and style.
A regulatory edge: Because the dripline defines where roof water lands, modern planning codes police the eaves overhang at property boundaries — a small detail with legal weight.