Passive cooling is "a building design approach that focuses on heat gain control and heat dissipation in a building in order to improve the indoor thermal comfort with low or no energy consumption." It pairs prevention — shading, insulation and careful form — with natural heat sinks: ventilation, night flushing, radiative, evaporative and earth-coupled cooling, the toolkit behind climate responsive design from the Persian wind tower to Green School Bali.
Type
Passive low-energy building technique
Era / Date
Ancient origins; codified as a modern discipline since the 1970s
Region
Worldwide, strategy chosen by local climate
Associated With
Windcatchers and qanats, courtyards, earth sheltering, thermal mass
Overview
Two families of measures: Preventive techniques stop heat before it enters — microclimate and site design, solar shading, building form and layout, thermal insulation and control of internal gains from lighting and equipment.
Five natural sinks: Dissipation techniques store or remove heat using thermal mass plus five natural cooling types: ventilation (cross-ventilation and stack ventilation), night flushing, radiative cooling, evaporative cooling and earth coupling by earth sheltering or buried earth ducts.
Climate decides: Night flushing is "most effective in climates with a large diurnal swing" and needs dry air, while evaporative cooling is "largely dependent on the humidity of the outside air; dryer air produces more cooling."
Key Facts
Measured savings: Evaporative coolers in Kuwait used roughly "75% less" power than conventional packaged air-conditioning units, and evaporative cooling has cut indoor temperatures "by 9.6 °C compared to outdoor temperature."
Surface science: The coolest white paints now achieve striking solar rejection — the whitest paint "can reflect up to 98.1% of sunlight" — turning the roof itself into a radiative cooling device.
Night flushing rules: Night ventilation works best when nighttime air falls well below the comfort limit of 22 °C (72 °F); humid climates, with small day–night swings and nighttime humidity often above 90 percent, gain little and risk mould.
Mass and ground: Heavy adobe or concrete walls store daytime heat for release at night, while earth coupling — as at earth-sheltered Taos — works best where soil is cooler than ambient air.
Context & Significance
Ancient pedigree: Traditional Iranian wind towers working with qanats cooled without fans, Persian yakhchāl ice houses used radiative cooling, Roman houses gathered air around impluvium courtyards, Egyptian windows were screened with moistened reeds, and salasabil fountains cooled the Red Fort.
Modern canon: The courtyard tradition survives in modern passive design, and contemporary buildings such as Manitoba Hydro Place, with automated ventilation louvers, show the strategies operating at tower scale.
Wikipedia: Passive cooling — the definition, prevention and dissipation strategy lists, the Kuwait, 9.6 °C and 98.1 percent figures, climate limits, and the wind tower, yakhchāl, Red Fort and Manitoba Hydro examples.