Rammed earth is a monolithic wall system built by pouring damp subsoil into formwork and compacting it, course by course, until the earth is "compacted to approximately 50% of its original volume." Also known as pisé, it is one of the oldest earth building elements — sections of the Great Wall of China used the technique — and one of the most renewed, from vernacular farm walls to the record-length façade of the Nk'Mip Desert Cultural Centre.
Type
Monolithic earthen wall, foundation and floor system
Era / Origin
Evidence from the 9th–7th millennium BC in the Fertile Crescent; common in China by 2000 BCE
Primary Material
Damp subsoil of sand, gravel, clay and silt, often stabilised with lime or cement
Structural Function
Load-bearing and non-load-bearing walls from about 150 mm to 600 mm thick
Overview
Definition: Rammed earth builds foundations, floors and walls from "compacted natural raw materials such as earth, chalk, lime, or gravel," tamped in layers 10–25 cm (4–10 in) deep inside formwork until each course is dense and hard.
Ancient pedigree: Neolithic evidence dates to the 9th–7th millennium BC in the Fertile Crescent and to 5000 BCE at Yangshao and Longshan culture sites in China, where rammed earth (hāng tǔ) was common for walls and foundations by 2000 BCE.
Working time: The material sets fast — walls "become too hard to work after approximately one hour" — so traditional builders rammed with a long pole while modern crews use pneumatic tampers in plywood or steel forms.
Core Characteristics
Thermal flywheel: High thermal mass moderates daily temperatures so strongly that warmth takes "almost 12 hours to be conducted through a wall 35 cm (14 in) thick," the property that links the element to passive cooling.
Humidity and safety: Clay-containing unclad walls can regulate interior humidity "between 40% and 60%," and rammed earth is fireproof, termite-resistant and non-toxic.
Strength range: Good cement-stabilised walls achieve compressive strengths "anywhere between 5 and 18 MPa," with Australian cement-stabilised rammed earth withstanding forces up to 40 megapascals — an order of magnitude stronger than traditional earth.
Weather limits: Walls may need vapour barriers and protection from heavy rain, and seismic regions require rebar reinforcement.
Notable Examples
Great Wall of China: Sections of the wall were built with the hangtu rammed-earth method already standard in China by 2000 BCE.
Early American pisé: Popularised in the United States by S. W. Johnson's Rural Economy (introduced 1806), the technique survives at the Borough House Plantation (1821) in Stateburg, South Carolina — the oldest and largest collection of "high style" pisé de terre buildings in the country.
Canadian church and 20th-century trials: St. Thomas Anglican Church at Shanty Bay, Ontario was built 1838–1841, and the USDA built experimental rammed-earth houses near Gardendale, Alabama in 1936.
Modern landmark: The Nk'Mip Desert Cultural Centre façade in Osoyoos, British Columbia, completed 2006, was the longest rammed-earth wall in North America as of 2014.
Global: Fertile Crescent, China, the Americas, Africa and Australia.
Influence and Legacy
African standards: Pilot projects in Tanzania, Sierra Leone, Ghana, Kenya, Uganda and Malawi from the late 1970s to early 1990s produced Rammed Earth Structures: A Code of Practice, adopted as a Zimbabwean national standard, then a SADC standard and finally an African Regional Standard.
20th-century campaigns: Mao promoted rammed earth from the mid-1960s, including the Third Front campaign with its slogan "First build the factory and afterward housing," while Western Australia developed the contemporary cement-stabilised industry in the 1970s.
Sustainability debate: Locally sourced soil keeps embodied energy low, but cement carries a cost: a 300 mm wall with 5 percent cement "produces slightly more emissions than a 100mm concrete wall."
Wikipedia: Rammed earth — definition and compaction, layer depths, ancient dates, Great Wall use, Borough House Plantation, Shanty Bay church, Nk'Mip 2006, strength and thermal figures, African standards, and the cement-emissions caveat.