A beam is a structural member that carries load perpendicular to its long axis — the horizontal member of the pair that defines post-and-lintel construction, spanning between columns, walls, or foundations. Where a column works in compression, a beam works in bending: under gravity it sags, its top fibers shortening in compression while its bottom fibers stretch in tension, with a neutral axis of unstressed material between. That behavior explains almost everything about beam design in timber, steel, and reinforced concrete alike — including why an I-shaped steel section outperforms a solid bar of the same weight.
Type
Horizontal member resisting loads by bending
Era / Origin
Prehistoric timber; theory from Galileo to Euler-Bernoulli
Primary Material
Timber, steel, reinforced and prestressed concrete
Structural Function
Spans between supports carrying floor and roof loads
Overview
Beams predate their theory by millennia: squared timber beams carried roofs and floors long before Galileo began the mathematics of bending. Slender beams follow Euler–Bernoulli theory, while deeper members need Timoshenko theory to account for shear deformation. The key insight is the second moment of area — stiffness grows steeply as material moves away from the neutral axis, which is why flanges at top and bottom (the I-beam) and hollow tubes do more work per kilogram than solid rectangles. Shear, meanwhile, concentrates near the supports, which is why timber beams split at their ends and concrete beams stirrup their web.
Beams are classified by their supports as much as their material: simply supported at both ends, fixed against rotation, continuous over several supports, overhanging, or cantilevered from one support only — the cantilever being the dramatic case. Beams can also be trussed with rods or cables, act in tension as tie beams, or be prestressed: stretched steel tendons pre-compress a concrete beam so the concrete — strong in compression, weak in tension — never leaves its comfort zone, the standard technique in highway bridges.
Core Characteristics
Sagging and hogging: Gravity loads sag a span between supports (compression top, tension bottom); over continuous supports the curvature reverses and the tension face flips.
Section efficiency: I and H sections for one-direction bending, box sections for two, cylindrical tubes for any direction — shape matters more than raw material quantity.
Composite forms: Flitch beams sandwich steel plate into timber; cross-laminated timber, prestressed concrete, and parallel strand lumber extend the palette.
Haunched profiles: Beams deepened and curved at their ends match the bending-moment diagram, saving weight at the cost of custom fabrication.
Multi-role members: The same bar can serve as a lintel over an opening, a collar or tie within a roof, or a chord of a truss.
Notable Examples
Kimbell Art Museum, Fort Worth: Louis Kahn's cycloid vaults are in fact thin post-tensioned concrete shells only about five inches thick that behave structurally as beams, supported at their four corners.
Farnsworth House, Plano: Mies van der Rohe's floor and roof plates act as beams spanning to minimal steel supports — the beam as an entire house plane.
Eames House, Los Angeles: The steel frame's beams and joists, erected in days, showed postwar industrial components turned into a residence.
Golden Gate Bridge: At bridge scale the stiffening truss and deck girders are the beam family carrying the deck between suspenders.
Historic timber traditions: Squared timber beams spanning masonry walls are the backbone of timber framing across East Asian and European vernacular building.
Architectural Connections
Column and Slab: the supports below and the planar member above; together they make the frame.
Truss and truss technique: the triangulated way of doing a beam's job over longer spans.
Modern Architecture: the expressed skeleton — beams and columns left visible — as an aesthetic credo.
Influence and Legacy
The skeleton city: Steel and concrete frames of columns and beams replaced loadbearing walls, enabling the open plan, the curtain wall, and the high-rise — engineer Fazlur Rahman Khan's tubular systems being the beam idea scaled to a whole building.
Efficiency engineering: Prestressing and composite sections turned the humble beam into the most optimized structural object in existence, from infrastructural spans to floor decks.
Exposed honesty: From Pier Luigi Nervi's ribbed concrete to mass-timber construction, visible beams carry structural expression from ornament to ethics.
Wikipedia: Beam (structure) — bending behavior, support classifications, section efficiency, materials from timber to prestressed concrete, and Euler-Bernoulli and Timoshenko theory.